Quality Washington GA septic system installers do a number of examination, long before a unit gets placed into the ground. A new unit will last years, and possibly even generations, if it’s installed properly, but it can malfunction immediately if it’s not. Furthermore, all Washington GA septic system installers must secure a permit in order to carry out the install, and may need to coordinate with city or county officials to show that a number of tests were done in order to progress. These three assessments are essential first steps that should always be taken before any work or designs are done, and it may also be helpful to accomplish them before you acquire a property, so you can be assured that a tank and leach field will be allowed.
1. Pit
The pit test is fairly straightforward. In the course of this test, a hole is dug and the soil is examined to determine its composition. A standard leach field is dependent on the soil’s structure to drain efficiently. If there is a considerable amount of gravel or sand, your leach field should be capable to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a bunch of clay or rock, it won’t drain well, and so a standard leach field will not be an option. If the site you’ve selected does not pass the pit test, you may be able to pick another site on your property or use an alternate kind of drain field, like a mound system.
2. Perc
The perc, or percolation test, calls for excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is typically left saturated for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and observed for water drainage.
3. Visual
There are many things an inspector will check visually. Many units are gravity-fed, so they don’t rely upon electricity or pumps to transfer effluent from the tank to the leach field. Because of this, the incline of the ground is essential. An inspector will also search for slopes that could possibly feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Washington GA Septic System Installers Now
Choosing the right design, type of system, and assessing the land properly, are all essential steps in making sure an install goes off without a hitch. Most importantly, these steps ensure that the install is done correctly, so that a system provides many years of use without problems. If you’re preparing for an install, call Septic Tank Pros Augusta GA. Our partner specialists are knowledgeable and devoted to quality, so you could be sure the job is done right. Call (706) 204-1717 right now.